C32 ACERT™ (Dry Manifold)

Request Info

Contact Us For Price

SPECS SUMMARY

Maximum Rating1500 BHP (1118 bkW)
EmissionsEPA and CARB Non-Road Mobile Tier 2, IMO Tier II, China Stage III
Displacement1960.5 in³ (32.1 l)
Minimum Rating800 BHP (596 bkW)
Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C32 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C32 ACERT Industrial Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent and China Stage III emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.

Specifications

Maximum Rating1500 BHP (1118 bkW)
EmissionsEPA and CARB Non-Road Mobile Tier 2, IMO Tier II, China Stage III
Displacement1960.5 in³ (32.1 l)
Minimum Rating800 BHP (596 bkW)
Length75.5 in (1918 mm)
Width58 in (1473 mm)
Height52 in (1321 mm)
Weight5040 lb (2286 kg)
Governor and ProtectionADEM A3
AspirationTurbocharged-Aftercooled
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136
Rotation from Flywheel EndCounterclockwise
Stroke6.4 in (162 mm)
Bore5.7 in (145 mm)
Cooling System14.5 gal (US) (55 l)

Benefits and Features

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Large variety of factory-installed engine attachments reduces packaging time

Every engine is full-load tested to ensure proper engine performance.

More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment

  • Quad turbocharger — 3 cylinder exhaust to each turbo
  • Connections configured for ATAAC (Air-to-Air-Aftercooled) or remote heat exchanger
  • ADEM A4 electronic control module
  • Electronic governing, PTO speed control
  • Customer programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Automatic fuel temperature compensation
  • Programmable low and high idle, and top engine speed limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system
  • SAE J1939 broadcast (diagnostic and engine status)
  • Gear-driven centrifugal jacket water pump — RH
  • Integrated thermostat and housing
  • Engine oil cooler
  • Optional installed transmission oil cooler
  • Exhaust manifold — dry
  • Two vertical exhaust outlets (front and rear)
  • MEUI
  • Fuel priming pump
  • Fuel transfer pump
  • Primary and secondary fuel filter — RH configured for remote mounting (installed RH on shipping plate)
  • SAE No. 0 or SAE No. 1 flywheel iron housing
  • SAE No. 0 or SAE No. 1 flywheel
  • Optional transmission adapter
  • Crankcase breather
  • Oil filter — RH standard, optional LH or remote mount service
  • Oil level gauge — RH standard, optional LH or dual service
  • Oil filler — RH standard, optional LH or dual service
  • Shallow oil pan, rear sump
  • Trunnion front support
  • Vertical and horizontal pads on rear flywheel housing
  • 24V electronic
  • Engine overspeed with optional air shut-offs with indicators
  • Low engine oil pressure
  • Fuel filter restriction
  • Fuel temperature
  • High engine coolant temperature
  • Low engine coolant temperature
  • Vibration damper and optional guard
  • Lifting eyes
  • Optional customer wiring connector
  • Service tool connector
  • Paint — Cat yellow

Optional Equipment

  • Air cleaner
  • Air inlet adapters
  • Turbocharger outlet adapters
  • Air lines
  • Battery chargers
  • Charging alternators
  • Alternator mounting
  • Circuit breakers and mountings
  • Dry charge coolant conditioners
  • Thermostat housing
  • Coolant level sensor
  • Radiator
  • Blower fans
  • Suction fans
  • Fan adapters
  • Fan drives
  • IMO certifications
  • Elbows
  • Mufflers
  • Electric fuel priming pump
  • Customer management device
  • Interconnect harness
  • Gauges and instrument panels
  • Oil pans
  • Oil service side
  • Oil level gauge
  • Oil filters
  • Lubricating oils
  • Structural steel base
  • Engine support — front
  • Engine support — rear
  • Auxiliary drive
  • Damper pulley
  • Hydraulics gear pumps
  • Mechanical shutoffs
  • Solenoid shutoffs
  • Electric starting motors - 12V, 24V
  • Battery sets - 24V
  • Battery cable
  • Battery rack
  • Starting aids
  • Transmissions water lines
  • Transmissions cooler