C32 ACERT™ (Water-Cooled Manifold)
Contact Us For Price
SPECS SUMMARY
Maximum Rating | 1225 BHP (914 bkW) |
Emissions | EPA and CARB Non-Road Mobile Tier 2, EPA Marine Tier 2, IMO Tier II, China Stage III |
Displacement | 1960.5 in³ (32.1 l) |
Minimum Rating | 800 BHP (597 bkW) |
Specifications
Maximum Rating | 1225 BHP (914 bkW) |
Emissions | EPA and CARB Non-Road Mobile Tier 2, EPA Marine Tier 2, IMO Tier II, China Stage III |
Displacement | 1960.5 in³ (32.1 l) |
Minimum Rating | 800 BHP (597 bkW) |
Length | 76.1 in (1933 mm) |
Width | 57 in (1488 mm) |
Height | 54.7 in (1389 mm) |
Weight | 5084 lb (2306 kg) |
Aspiration | Turbocharged-Aftercooled |
Flywheel and Flywheel Housing | SAE No. 0 or SAE No. 1 |
Flywheel Teeth | 136 |
Stroke | 6.4 in (162 mm) |
Bore | 5.7 in (145 mm) |
Benefits and Features
Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat® transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Large variety of factory-installed engine attachments reduces packaging time
Every engine is full-load tested to ensure proper engine performance.
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Standard Equipment
- Connections configured for SCAC and ATAAC (Air-to-AirAftercooled) or remote heat exchanger
- ADEM A4 electronic control module
- Electronic governing, PTO speed control
- Customer programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Automatic fuel temperature compensation
- Programmable low and high idle
- Electronic diagnostics and fault logging
- Engine monitoring system
- SAE J1939 broadcast (diagnostic and engine status)
- Gear-driven centrifugal jacket water pump — RH
- Integrated thermostat and housing
- Engine oil cooler
- Optional installed transmission oil cooler
- Optional aftercooler and auxiliary water pump
- Optional jacket water heat exchanger
- Exhaust manifold — watercooled
- MEUI
- Fuel priming pump
- Fuel transfer pump
- Primary and secondary fuel filter — RH configured for remote mounting (installed RH on shipping plate)
- SAE No. 0 or SAE No. 1 flywheel iron housing
- SAE No. 0 or SAE No. 1 flywheel
- Optional transmission adapter
- Crankcase breather
- Oil filter — RH standard, optional LH or remote mount service
- Oil level gauge — RH standard, optional LH or dual service
- Oil filler — RH standard, optional LH or dual service
- Shallow oil pan, rear sump
- Trunnion front support
- Vertical and horizontal pads on rear flywheel housing
- 24 volt electronic
- Engine overspeed with optional air shut-offs with indicators
- Low engine oil pressure
- Fuel filter restriction
- Fuel temperature
- High engine coolant temperature
- Low engine coolant temperature
- Vibration damper
- Lifting eyes
- Optional customer wiring connector
- Service tool connector
- Paint — Cat yellow
- Optional two-part primer and mastic caulk
Optional Equipment
- Air cleaner
- Air inlet adapters
- Turbocharger outlet adapters
- Air lines
- Battery chargers
- Charging alternators
- Alternator mounting
- Circuit breakers and mountings
- Dry charge coolant conditioners
- Thermostat housing
- Coolant level sensor
- Radiator
- Blower fans
- Suction fans
- Fan adapters
- Fan drives
- IMO certifications
- Elbows
- Mufflers
- Electric fuel priming pump
- Customer management device
- Interconnect harness
- Gauges and instrument panels
- Oil pans
- Oil service side
- Oil level gauge
- Oil filters
- Lubricating oils
- Structural steel base
- Engine support — front
- Engine support — rear
- Auxiliary drive
- Damper pulley
- Hydraulics gear pumps
- Mechanical shutoffs
- Solenoid shutoffs
- Electric starting motors - 12V, 24V
- Battery sets - 24V
- Battery cable
- Battery rack
- Starting aids
- Transmission water lines
- Transmission cooler