C7 ACERT™ (Dry Manifold)

Request Info

SPECS SUMMARY

Minimum Rating225 BHP (168 bkW)
Maximum Rating300 BHP (223 bkW)
EmissionsEPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length41.4 in (1052 mm)
Cat C7 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C7 ACERT engines to deliver excellent performance with low operating costs and emissions. Applications powered by C7 ACERT engines include pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. The C7 ACERT engines, with ratings: 168-224 bkW (225-300 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Specifications

Minimum Rating225 BHP (168 bkW)
Maximum Rating300 BHP (223 bkW)
EmissionsEPA & CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length41.4 in (1052 mm)
Width29.9 in (759 mm)
Height40.6 in (1031 mm)
Weight1386 lb (629 kg)
Governor and ProtectionElectronic (ADEM™ 3)
AspirationTurbocharged-Aftercooled
Displacement441.8 in³ (7.2 l)
Flywheel and Flywheel HousingSAE 1, 2, or 3
Flywheel Teeth156 (SAE 1), 134 (SAE 2), 126 (SAE 3)
Rotation from Flywheel EndCounterclockwise
Stroke5 in (127 mm)
Bore4.3 in (110 mm)
Lube Oil System - Refill4.8 gal (US) (18 l)

Benefits and Features

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Large variety of factory installed engine attachments reduces packaging time

Every engine is full-load tested to ensure proper engine performance.

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment

  • Turbocharger, air to air aftercooled
  • Air inlet, LH side facing front 79.0 mm (3.11 in) connection
  • Electronic governing, PTO speed control
  • Programmable rating
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speeds, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Automatic variable timing, electronic
  • All engines shipped at max rated rpm
  • Thermostats and housing, vertical outlet
  • Jacket water pump — belt-driven, centrifugal
  • Water pump, inlet RH front vertical inlet (pointing down)
  • Exhaust manifold — dry
  • Front turbo exhaust
  • Hydraulic Electronic Unit injection (HEUI)
  • Fuel filter — secondary, LH front (2-micron high performance)
  • Fuel transfer pump — LH front
  • Fuel priming pump — LH front
  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Electronic installation kit (connectors, pins, sockets)
  • Crankcase breather, LH side
  • Oil cooler, RH
  • Oil filler, front top valve cover
  • Oil filter and sampling valve, RH
  • Oil pan, front sump, 31 L (33 qt) oil change capacity
  • Oil dipstick, LH rear
  • Engine oil pump (gear-driven)
  • Engine shipped without oil
  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (0.88 in) wide

Optional Equipment

  • Air compressors
  • Air compressor governor
  • Air cleaners
  • Precleaner
  • Air inlet elbow
  • Air shutoffs
  • Charging alternators
  • Alternator mountings
  • Alternator belt tensioner
  • Alternator pulleys
  • Alternator guards
  • Radiators
  • Fan drive and pulley - f/u/w radiator packages
  • Fans f/u/w radiator packages
  • Coolant level sensor
  • Fan drive mountings
  • Fan adapters
  • Fan adapter for blower fans
  • Fan pulleys
  • Fan height instructions
  • Vee belts for customer-supplied radiators
  • Suction fans and blower fans
  • Water inlet elbows
  • Dry charge coolant conditioners
  • IMO Certification
  • Flexible fitting
  • Turbocharger exhaust outlet adapters
  • Elbows, flange, pipes, clamp
  • Rain caps
  • Manifolds
  • Mufflers
  • Flexible fuel lines
  • Water separator and fuel filters
  • Fuel cooler
  • Tool set
  • Gauges and instrument panels
  • Interconnect harnesses
  • Voltmeters
  • Gauge mounting
  • Ammeter
  • Oil pan
  • Drain and cover
  • Oil level gauges
  • Remote oil filter
  • Oil fillers
  • Lubricating oil
  • Fumes disposal
  • Structural steel base
  • Front engine support
  • Rear engine supports
  • Enclosed clutch
  • Clutch supports
  • Flywheel stub shaft
  • Hydraulic pump drives
  • Hydraulic gear pumps
  • Starting Aids
  • Electric Starting Motors — 12V and 24V
  • Battery Sets - 12V and 24V (dry)
  • Battery Cable