C9 ACERT™ (Dry Manifold)

Request Info

SPECS SUMMARY

Minimum Rating275 BHP (205 bkW)
Maximum Rating375 BHP (280 bkW)
EmissionsEPA and CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length43 in (1092 mm)
Cat C9 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C9 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C9 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C9 ACERT engines, with ratings: 205-280 bkW (275-375 bhp) @ 1800-2200 rpm, meet China Stage II, EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent ratings are available using U.S. EPA and EU Flexibility. They are also available in other regulated and non-regulated areas.

Specifications

Minimum Rating275 BHP (205 bkW)
Maximum Rating375 BHP (280 bkW)
EmissionsEPA and CARB Non-Road Tier 3, EU Stage IIIA, IMO Tier II
Length43 in (1092 mm)
Width32.6 in (828 mm)
Height40.3 in (1024 mm)
Weight1578 lb (716 kg)
Governor and ProtectionElectronic (ADEM™ A3)
AspirationTurbocharged-Aftercooled
Displacement538 in³ (8.8 l)
Flywheel and Flywheel HousingSAE 1 or 2
Flywheel Teeth113 (SAE 1), 134 (SAE 2)
Rotation from Flywheel EndCounterclockwise
Stroke5.87 in (149 mm)
Bore4.41 in (112 mm)
Lube Oil System - Refill8 gal (US) (30.3 l)
Cooling System3.7 gal (US) (13.9 l)

Benefits and Features

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Large variety of factory installed engine attachments reduces packaging time

Every engine is full-load tested to ensure proper engine performance.

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment

  • Turbocharger, separate circuit (SCAC) or remote (REMAC) aftercooler
  • Single, right-side, center-mounted turbo with water-cooled turbine housing
  • Air inlet 101.6 mm (4 in) connection type
  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Fuel cooled ECU
  • Power compensation for fuel temperature
  • Programmable low and high idle
  • Electronic diagnostics and fault logging
  • Programmable monitoring system (engine speed, temperature, pressure)
  • J1939 broadcast (diagnostic and engine status)
  • Electronic installation kit (connectors, PINS, sockets) (nonhazardous environment only)
  • Certified electrical control system (hazardous environment only)
  • Derated engine: automatic ambient temperature compensation
  • Thermostats and housing, RH forward-facing outlet — 51 mm (2.01 in) connection
  • Jacket water pump — belt-driven, centrifugal
  • Water pump — inlet RH facing downward 63 mm (2.48 in)
  • Exhaust manifold — water-cooled
  • Single, center right-side mounted turbo with water-cooled turbine housing
  • Rear facing turbo exhaust 81.8 mm (3.22 in.) connection, non V-band clamp
  • Mandatory selection of: SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation
  • HEUI fuel system
  • Fuel filter — secondary, LH (2-micron high performance)
  • Fuel transfer pump — left front
  • Fuel priming pump — left front
  • Crankcase breather — LH
  • Crankcase fumes disposal with integrated service indicator, LH
  • Oil cooler — RH
  • Oil filter — RH
  • Oil pan — front sump
  • Oil filler — top mounted
  • Oil level gauge — LH side
  • Oil pump — gear-driven
  • Oil valve sampling
  • Preservation of turbocharger, flywheel, and crankcase
  • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter, 22.3 mm (7/8 in) wide
  • Vibration damper
  • Lifting eyes
  • Automatic variable timing — electronic
  • Literature
  • Flywheel housing and flywheel
  • Throttle position sensor and/or throttle control (non-hazardous environment only)
  • Primary filter/water separator
  • Turbo orientation

Optional Equipment

  • Air compressor governor
  • Air cleaners
  • Precleaner
  • Air inlet elbow
  • Air shutoffs
  • Charging alternators
  • Alternator mountings and pulleys
  • Alternator belt tensioner
  • Radiators
  • Radiators
  • Fans f/u/w radiator packages
  • Coolant level sensor
  • Fan drive mountings, adapters, pulleys
  • Vee belts for customer-supplied radiators
  • Suction fans and blower fans
  • Water inlet elbows
  • Dry charge coolant conditioners
  • IMO Certification
  • Flexible fitting
  • Turbocharger exhaust outlet adapters
  • Elbows, flange, pipes, clamp
  • Rain caps
  • Manifolds
  • Mufflers
  • Flexible fuel lines
  • Water separator and fuel filters
  • Fuel cooler
  • Gauges and instrument panels
  • Interconnect harnesses
  • Voltmeters
  • Gauge mounting
  • Ammeter
  • Oil pan
  • Drain and cover
  • Oil level gauges
  • Remote oil filter
  • Oil fillers
  • Lubricating oil
  • Fumes disposal
  • Fumes disposal mounting
  • Structural steel base
  • Front and rear engine supports
  • Enclosed clutch
  • Clutch supports
  • Flywheel stub shaft
  • Hydraulic pump drives
  • Hydraulic gear pumps
  • Pulley
  • Starting aids
  • Electric starting motors — 12V and 24V
  • Battery sets — 12V and 24V (dry)
  • Battery cable
  • Transmission cooler
  • Tool set